4-in-1 ABS Deck Board Spacer

Set the gap. Build the deck.

Keep your board spacing consistent with a four-edge ABS deck spacer. Rotate the tool to select one of four nominal gaps, place the selected edge between boards, and use the open center to lift it out as you move along the deck.

• Four gaps in one tool: 5/32 in, 3/16 in, 1/4 in and 5/16 in.
• Easy to grip: the open center gives your fingers room to hold and remove the spacer.
• Four color choices: Blue, Yellow, Green and Orange. Every color provides the same four spacing edges.
• Choose your pack: single-color packs from 1 to 64 spacers. Select Color and Pack size before adding to cart.

Pack sizes and prices

Quantity means packs. For example, Pack size: 8 Pieces with Quantity: 2 supplies 16 spacers in your selected color. Each pack contains one selected color; the four-color gallery image shows the available choices.

Tool details

How to use

1. Check the decking manufacturer's required board spacing. For pressure-treated lumber or hardwood, also account for the board condition and installation guidance.
2. Rotate the spacer to the edge marked with your required gap. Place that edge between adjacent boards; use more than one spacer along the board to maintain alignment.
3. Fasten the boards using the decking and fastener manufacturer's instructions. Lift the spacer out by its open center and move it to the next position.

For pressure-treated lumber, composite, PVC and hardwood decking where one of the four available gaps matches the specified installation requirements. Color does not indicate a different gap size. Boards, screws and power tools are not included.

Product

4-in-1 ABS Deck Board Spacer

Brand

Vertexa Structural Fastener

Color

Blue, Yellow, Green, Orange

Pack size

1 Piece, 2 Pieces, 4 Pieces, 8 Pieces, 16 Pieces, 32 Pieces, 64 Pieces