← All products
DeckPro™ Composite Screws

Heavy timber series

DeckPro™ Composite Screws

Choose size & pack

First-Time Right. Zero Callbacks.

The DeckPro™ Composite Exterior Trim Head screw is a purpose-built fastener optimized for securing composite and cellular PVC trim and fascia. Featuring precision reverse threads under the head, it traps displaced substrate material during drive-in, effectively preventing mushrooming and dimpling to guarantee a smooth, uniform surface.

Trim Head: Clean, finished look

Underhead Reverse Thread: Reduces or eliminates mushrooming

Star Drive Recess: Zero stripping, with 6 points of contact

3✖️Ceramic Coating: Approved for use in treated lumber

  • Drill Point Tip: Reduces board splitting and provides a clean finish
  • T15 Drive Recess: 6 points of contact eliminates stripping
  • Dual Thread Form: Delivers superior clamping force, replicating the holding power of topdown fastening
Long structural lengthsT30 driveReamer knurl

Choose the right size and pack

Not sure which size or how many?
Tell us about your project. We’ll help you choose.

Calculation references

This is a product-fit and quantity estimate, not a structural design. Length profiles are preliminary catalogue screening assumptions. Fence/trim schedules and spare allowance are user settings. Manufacturer-specific approvals do not transfer to Vertexa. Source review: October 10, 2026.

FIND MY FASTENER

Let’s find what you need.

What are you working on?

Features & applications

Features built into every connection.

Drill Point Tip

Drill Point Tip

Reduces board splitting and provides a clean finish

T15 Drive Recess

T15 Drive Recess

6 points of contact eliminates stripping

Dual Thread Form

Dual Thread Form

Delivers superior clamping force, replicating the holding power of topdown fastening

Two Thread Directions. One Clean Finish.

Size & pack availability

Choose the right length and pack for your project.

Size Handy Pack100 pcs Homepak500 pcs Engineer Tub1000 pcs
#8 × 1-1/2"
#8 × 1-7/8"
#8 × 2-1/4"
#8 × 3"

Applications

For versatile interior and exterior applications.

DeckPro™ supports composite boards, cPVC, and door or window jambs with a seamlessly color-matched surface.

Exterior Trim

Door/window jambs

cPVC Deck Boards

Composite decking

Hidden Fastening Systems

Composite trim

DeckPro ™  Composite Screws Drawing

Documentation

DeckPro ™  Composite Screws Drawing

Request technical support
  • 5 stars: 6 (86%)
  • 4 stars: 0 (0%)
  • 3 stars: 1 (14%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
D
Dave_C

These deck screws work every bit as good, and look just like, deck screws costing a lot more. There's nothing fancy about the packaging (they come in a plastic container with a torx head driver) but they get the job done. And they match the color of my decking perfectly. For installation on a composite deck it's a good idea to start a pilot hole using a small drill bit. It's possible to drive these into the decking without a pilot hole but it's more work. I would definitely purchase these again!

Dave_C review photo
G
Goelsie

These work great. No torx strip issues. Pretty much flawless in my opinion.

Goelsie review photo
J
Joe

They blend in just as good as the big box store screws and perform identically. Saved my job and saved me money. I would have never used them if the store kept their shelves stocked but now I’ll buy these exclusively moving forward.

Joe review photo
J
Juanpa B.

Works as advertised and excellent quality screws

Juanpa B. review photo
N
Noah K.

Installed our pool deck using these last fall. We've gone through heavy snow, freeze-thaw cycles, and summer heatwaves, and not a single screw has backed out, popped up, or shown any signs of rust bleed. The coating quality is definitely there. Very reliable.

H
Heavy h.

The screws work great in the composite decking itself, but I had two snap off right at the shank when driving them into an older, very dense pressure-treated joist without pre-drilling. Once I started drilling pilot holes through the joists, they performed fine. Just be careful if your substructure is super hard lumber.

B
Blaineosuta

Used these for a backyard deck and stair project using capped composite boards. The painted head blends in nicely with the board color so the fasteners almost disappear.

FAQs

What are composite screws, and how are they different from standard wood screws?+
Composite screws are specifically engineered for fastening composite decking, PVC, and capped polymer boards. Unlike standard wood screws, they feature under-head cutting/milling ribs and a specialized thread design near the head. This allows the screw to cleanly countersink into dense composite materials without creating a "mushroom" effect (where the screw head forces material upward, leaving an unsightly raised bump around the hole). They also typically feature corrosion-resistant coatings (such as ACQ-compatible epoxy or Grade 305/316 stainless steel) to withstand harsh outdoor weathering.
Do I need to pre-drill holes before installing composite screws?+
In most cases, pre-drilling is not required when using high-quality composite screws featuring a self-drilling or type-17 cutting point. However, pre-drilling is strongly recommended in specific scenarios: Near the very ends or edges of composite boards to prevent splitting. When working with dense capped composite or PVC boards in cold weather, as lower temperatures make materials more brittle. If you are using solid-core composite boards or driving into dense hardwood joists (e.g., pressure-treated lumber or pressure-treated framing in colder climates).
How do I prevent the "mushrooming" effect when driving composite screws?+
"Mushrooming" occurs when the screw head pushes excess composite material up above the surface of the board. To prevent this, ensure you use screws with reverse threads or cutting fins under the head, which clear away and countersink the displaced material smoothly. Additionally, use a drill/driver equipped with an adjustable depth-setting nose piece or clutch to stop the screw precisely flush with the board surface. Avoid over-driving the screw, as sinking it too deep compromises the protective cap of the composite board.
What length of composite screw should I use for standard decking boards?+
As a general rule, the screw needs to penetrate at least 1-1/2 inches (approx. 38mm) into the framing joist for maximum holding power. For standard 5/4-inch (approx. 25mm thick) composite decking boards, a 2-1/2 inch screw is the industry standard. If you are installing thicker fascia boards, stair treads, or multi-layer setups, scale up your screw length accordingly while ensuring the shank diameter matches your structural load requirements.
Are composite screws compatible with ACQ pressure-treated lumber joists?+
Yes. Modern pressure-treated lumber uses chemicals like Alkaline Copper Quaternary (ACQ), which are highly corrosive to standard plain steel or zinc-plated fasteners. All exterior-grade composite screws should feature ACQ-compatible coatings (such as multi-layer ceramic/epoxy finishes) or be made of marine-grade Stainless Steel (Grade 305 or 316). Always verify that the fasteners you choose carry a corrosion-resistance rating suitable for treated lumber to prevent premature rust stains and structural failure.

Similar products

View all

Need help choosing?

Tell us about your project. We’ll help you choose the right size and pack.

Safe & Secure

30-day return requests

Unused, eligible items. Return shipping and a 10% restocking fee apply.

View return policy

Payment Options

Pay your way at checkout

Available payment methods are shown at checkout.

Trusted Delivery

Shipping options at checkout

View rates and estimated delivery times before you pay.

View shipping details